(800) 261-9642

B55AC

Bendi: Forklifts

Print Email

Specifications

Capacity:	5,500 lbs
Load Center:	24 in
Power Source:	48 Volt Battery
Travel Speed:	6.5 mph
Weight with Battery:	16,950 lbs

Contact Us Today

Bendi Rear Wheel Drive High Capacity, High Lift Narrow Aisle Multipurpose Electric Articulating Forklift

The Bendi model B55AC works in aisles as narrow as *84″ (2.13M). The B55AC high volume model has a basic capacity of 5,500 lbs. (2495kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M).

The B55AC model is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. The B55AC can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteer^TM front wheel hydraulic steering, the B55AC provides exceptional control and makes load placement and retrieval superior to the competition.

Features
Links

Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking and Traction
Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
B55AC 5,500 lb. (2495kg) Capacity at 24″ (600mm) Load Center
High Visibility Mast Allows Optimum Safety and Control
Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators

Spec Sheet

More information available